Providing Solutions for the Electronics and Semiconductor Industries...

 

   
Pages[ 1 2 ] Back to Products
  
       
 

Photo Stencil's E-Blade® electroformed squeegee blade improves print deposition quality, uniformity, and consistency by offering a rigid, low-friction, hard-nickel edge for cleaner prints, reduced stencil wear, and less material waste.

Manufactured to fit any of the common metal squeegee holders including DEK, MPM, Fuji, EKRA, Panasonic and Speedprint.

    DEK: (millimeters) 170, 200, 250, 300, 350, 400, 440, 483, 510, and 535.
    MPM Speedline: (inches) 6, 8, 10, 12, 14, 16, 18, 19, 20, and 22.
    Fuji: (inches) 8, 10, 12, 14, 16, and 18.
    Panasonic: (inches) 6, 8, 10, 12, 14, 16, 18.
    EKRA: (millimeters) 200, 250, 300, 350, 400, 450, 500, and 550.
 
 
AMTX E-BLADE ELECTROFORMED BLADES
  
       
 

Photo Stencil's patented DuraGlide™ metal squeegee is unique, both in its materials and design. It is manufactured according to a proprietary in-house process. First a precisely engineered edge and surface is produced , then the entire blade is coated with Titanium Nitride to provide an extremely hard surface finish. This treatment preserves the engineered edge feature throughout the life of the squeegee blade. This yields near perfect solder brick deposits over tens of thousands of print cycles.

    DEK: (millimeters) 170, 200, 250, 300, 350, 400, 440, 483, 510, and 535 MPM Speedline: (inches) 6, 8, 10, 12, 14, 16, 18, 19, 20, and 22 Fuji: (inches) 8, 10, 12, 14, 16, and 18 Panasonic: (inches) 6, 8, 10, 12, 14, 16, 18 EKRA: (millimeters) 200, 250, 300, 350, 400, 450, 500, and 550
   
 
 
  DURAGLIDE BLADES  
   
 
 

Photo Stencil supplies squeegee blade head assembly tools for all squeegee blade types including E-Blade® squeegee blades, DuraGlide™ squeegee blades, CA squeegee blades, and polyurethane squeegee blades for all common stencil printing machines.

Applications


Head Assemblies are offered for the following stencil printing machines:
    DEK
    MPM Speedline
    EKRA
    Panasonic
    Quad
    Fuji
    
 
 
 
HEAD ASSEMBLY, HOLDERS, ACCESSORIES AND SHIMS
  
       
 

Photo Stencil provides premium Wiper Blades for both DEK and MPM stencil printers. These wiper blades have a protective titanium nitride coating and are custom designed and engineered by Photo Stencil.

Applications

    Recommended for use with MPM Rheometric Pump and DEK Proflow Heads
    Well-suited to printing fine pitch devices and for apertures as large as 6000 microns
    Ideal for printing Intrusive Reflow Through-Hole apertures
 
   
WIPER BLADES