Providing Solutions for the Electronics and Semiconductor Industries...

 

     
       
 

Applications:
Tera and Vectra Frameless System: Photo Stencil has all the strech border opening patterns on file to manufacture any of the Tetra or Vectra Frameless stemcils.

Advantages:
Quick turn prototype stencils
Frameless stencils take up much less room than a framed stencil.

  
   
FRAMELESS STENCIL
  
  Laser Cut and Chemically-Etched Stencils
The Hybrid Stencil (H-FABᴁ) combines Laser-Cut and Chem-Etch technologies in a single stencil. This technology is for applications having a small number of total apertures (6,000 to 12,000).		  
   
LASER CUT AND CHEMICALLY- ETCHED STENCIL
  
  Advantages:
Excellent Print Performance.
Yields Excellent Registration.
Improved Aperture Quality.		  
   
LASER CUT STENCIL WITH ELECTROPOLISH
  
 

Advantages:
Steps Stencils offerthe SMT process engineer significant flexibility in acheiving the proper solder paste height and solder paste volume for the overall paste printing process.

1.) Step-Down Stencils:
20 mil pitch QFP: 7 mil thick for Rís and Cís with a step-down to 5 mil for 20 mil pitch QFPs
16 mil pitch QFP, 0201s and/or µBGAís: 5 mil thick stencil with a step-down to 4 mil for the 16 mil pitch QFP, 0201s, and or µBGAs.
2.) Step-Up Stencils:
CBGA or CGBGA: 6 mil for normal components and a step-up to 8 mil for CBGAs. Extra paste height required for this component due to possible coplanarity issues.
Through-Hole Connector: 6 mil for normal components and a step-up to 10 mil for the through-hole connector.
3.) Relief Step-Board Side:
Bar Code Relief. Raised Via Pads and Relief for Paste (Two Print Stencil).

  
 
STEP STENCIL
  
     
     
     
     
     
     
 
 
 

Space Saver Frame:

The master frame is 1 inch thick and has 2 pins to hold the Space Saver Frame in place. The Space Saver Frame is Ω inch thick and has alignment holes fot he 2 Frames can be stored in the slot that holds one regular 29 ё x 29 ё frame.

  
 
CONDUCTIVE BRUSH
  
 
 
 
MASTER FRAME